"The Worlds Largest Do It Yourself Insulating Website!"
                  
            Itchy's  Do It Yourself Home Insulation
     
"If you ain't itchin you ain't insulating"



























Itchy's Forum

Recent Articles

 

 

Google

How Much Attic Ventilation Do I Need?


Attic ventilation is necessary to prevent moisture build up that will eventually rot the roof. It also helps to keep the attic cooler in the summer months. 

Local building codes may differ but this is a good rule of thumb method of calculating how much attic ventilation that is needed. Basically, you need 50% of the ventilation to come from the lower soffit or eave vents. The other 50% should come from the upper ventilation, such as roof jacks, ridge vents or gable vents. 

The method of determining how much attic ventilation that is required is fairly simple. For new construction you need one square foot of net free area (NFA) ventilation for every 300 square feet of attic floor. 

Example:

A 900 square foot attic would be calculated as follows:

900 Divided by 300 = 3 sf net free area needed. Next convert it to inches:

3 X 144 = 432 inches. Finally, divide it by 2 to determine how much you need:

432" Divided by 2 = 216 square inches.

So, you can see for a 900sf attic you would need 216 square inches for the lower ventilation and 216 square inches for the upper ventilation. Remember, this is "net free area". The screens that cover the vents are considered an obstruction and don't calculate into the equation. 

Why convert to inches?  Be cause most upper and lower vents are sold based on the number of net free inches that they produce. 

See also:

How To Install Roof Vents

How To Install Gable Vents

How To Install Soffit Vents

How To Install Attic Ventilation Baffles (or Rafter Vents)

Don't Want To Do It Yourself? 
Find a pre-screened insulation contractor in your area.

Get Up to 4 Quotes Now. It's Quick, Free, and Easy!


Google
New Page 1

Resources    Contact Us    Terms of Use    Privacy Policy    Add A Link    Sitemap     

Copyright 2007 - 2014 ,  J. Holt & Associates, All Rights Reserved

Page copy protected against web site content infringement by Copyscape